OUR STORES

blog-placeholder

XStore London

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud. Lorem ipsum dolor sit amet, consectetur adipiscing. Ut enim ad minim veniam, quis nostrud. Lorem ipsum dolor.

Store Address

48 Park Avenue, East 21st Street, Apt. 304
London NY 10016

Contact Info

Email: youremail@site.com
Phone: +1 408 996 1010
Fax: +1 408 996 1010

This post is also available in: Italiano (Italian) Русский (Russian) 简体中文 (Chinese (Simplified))

CeboArt Model

High-thickness decorative coating for interiors, it allows to perform different kind of workmanships; classic and uniform or innovative materic solutions without rigorous structures and limits.

CeboArt Model Application

Spatolato effect: Apply CeboArt Model in one uniform thickness layer, with the stainless steel trowel, then create the desired artistic effect by crossed and irregular movement. Before complete drying, re-finish the surface to smooth the drawing. In case of too fast drying, moisten the surface with water spray.

Onda effect: Apply CeboArt Model horizontally or vertically in a uniform thickness layer, using the notched side of the “Shark” trowel and, with the plane side of the tool, softly smooth over the drawing. When the product is still wet, work the surface with the PVC trowel “Onda 4”, following the selected direction horizontally or vertically. Before complete drying, re-finish the surface to lightly smooth the grooves. In case of too fast drying, moisten the surface with water spray.

Sbrecciato effect: Apply CeboArt Model diagonally in one uniform thickness layer, using the notched side of the “Shark” trowel; re-finish the surface using the plane side until, a continuous series of smooth diagonal streaks, of different sizes, are obtained. When the product is still wet, dab or scratch the surface using “CeboSign” tool following the drawing direction. Before complete drying, gently smooth over the grooves with the stainless steel trowel. In case of too fast drying, moisten the surface with water spray.

Craquelé effect: Apply CeboFix R by roller according to the chosen colour that will be the colour of the cracks. After complete drying of CeboFix R, apply one coat of CeboBreak by crossed brushstrokes until the saturation is complete and the surface will be translucent. After a minimum of 4h and a maximum of 24h apply CeboArt Model with the stainless steel trowel in a uniform thickness layer:  realized the desired artistic effect using irregular crossed trowel strokes and wait until the cracks will appear. Before complete drying, gently smooth over the drawing.

CeboBreak

Intermediate transparent base coat, used to attain “cracked” effect.

CeboWax

Interior finishing based on natural bee wax and selected binders; it allows to create soft shades, leaving the surface breathable and hydrophobic. CeboWax can be diluted with water until a maximum of 30%; it must be applied with synthetic sponge in one or two coloured coats, from bottom to top on a completely dry surface.

Note: it is recommended to mix the product during use.

product use dilution (water) approx. coverage tool drying time colour
base coat CeboFix R int/ext 20% – 30% 10-12 m2/L min. 24 h CeboKit & CCS
intermediate base coat CeboBreak interior ready to use 10-12 m2/L min. 4 h

max 24 h.

transparent
finish coat CeboArt Model interior ready to use 0,7-1 m2/Kg min. 24 h white
finish coat CeboWax interior 30% 12-14 m2/L 4-6 h CeboKit & CCS

Colour card:

The shades here presented are computer colour simulations; they must therefore be considered as indicative only, and not binding. Please refer to the Colour Cards with original samples, available with our authorised Dealers.

CeboFix R CeboKit /4
5 L 1×100 ml
1 L 20 ml

 

CeboWax CeboKit
2,5 L 1×25 ml
1 L 10 ml