OUR STORES

blog-placeholder

XStore London

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud. Lorem ipsum dolor sit amet, consectetur adipiscing. Ut enim ad minim veniam, quis nostrud. Lorem ipsum dolor.

Store Address

48 Park Avenue, East 21st Street, Apt. 304
London NY 10016

Contact Info

Email: youremail@site.com
Phone: +1 408 996 1010
Fax: +1 408 996 1010

This post is also available in: Italiano (Italian) Русский (Russian) 简体中文 (Chinese (Simplified))

Acrylic, water based, washable finish for interiors with subdued silky reflections and soft to the touch. CeboSi Setoso is the ideal product to create refined and essential decorative effects, with velvety shades and discreet plays of light, for classic and modern interior design. The aesthetic value of the product matches its excellent characteristics of resistance to washing, elasticity and lastingness. In case of rough or fine plastered walls, it is important to level out the surface with a suitable leveling paste.

Surface treatment:

Ensure that the substrates are perfectly clean, dry and uniform. In case of recently repaired walls, highly absorbent or chalky substrates, carefully clean the surface and apply a coat of priming fixative CeboFix M, by paintbrush, diluted 1:1 with water.

CeboSi Fondo:

Acrylic, water based, pigmented, base coat, with a slightly rough texture. Apply CeboSi Fondo in the same colour of CeboSi Setoso, with a short pile roller, in one or two coats to reach a perfect cover of the surface. Apply CeboSi Setoso when CeboSi Fondo is perfectly dry.

Application cycle:

With a sufficient quantity of product, apply a uniform layer of CeboSi Setoso using a plastic trowel and covering 2-3 square meters; then go over the surface with the clean trowel to remove the excess of product. When the first coat is completely dry (after  about 4-6 hours), apply the second coat with the same technique; go over the surface again with the clean trowel, being careful not to follow the same directions of the previous application, in order to create the desired chiaroscuro effect.

CeboTatto:

Transparent finish for interior decoration, which allows to obtain a pleasant tactile feeling combined with a deeply matt appearance. Additionally CeboTatto gives a greater brightness to the colours and an excellent scratch resistance to the surface. When CeboSi Setoso is completely dry, apply CeboTatto with a short pile roller, in one or two coats to reach the tactile effect desired.

product use dilution (water) approx. coverage tool drying time colour
base coat CeboSi Fondo interior 5% 10 m2/L 6-8 h CeboKit & CCS
finish coat CeboSi Setoso interior ready to use 4 m2/L 8-12 h CeboKit & CCS
protective coat CeboTatto interior 5% 10 m2/L 4-6 h transparent

Colour card:

The shades here presented are computer colour simulations; they must therefore be considered as indicative only, and not binding. Please refer to the Colour Cards with original samples, available with our authorised Dealers.

Preparation of the colours
CeboSi Fondo CeboKit
/1 /4
5 L 1×25 ml 4×25 ml
2,5 L 12,5 ml 2×25 ml
1 L 5 ml 20 ml

 

CeboSi Setoso CeboKit
/1 /4
5 L 1×25 ml 4×25 ml
3 L 15 ml 60 ml
1 L 5 ml 20 ml