PIETRA RINASCIMENTALE

CeboMarmo, le pietre splendenti

Precious water-based acrylic finish for interiors, with a glossy appearance. CeboMarmo reinterprets the marble effect by reproducing the movements of the typical veins and the brilliance of a precious and refined material, giving an exclusive charm to any environment.

Suitable surfaces:

Surfaces have to be perfectly smooth and flat: any imperfections must be eliminated or during CeboMarmo application defects would be negatively emphasized.

If a wall leveling would be required, it’s important to proced in the same direction and style of the final effect application.

On smoothed,powdering or absorbent walls, apply one coat by brush of fixative CeboFix M diluted 1:1 with water.

FIRST PHASE STARTING:

CeboFix Primo primer application:

Apply one coat of CeboFix Primo, with a short-hair roller, diluted to 20% with water; wait the complete drying to proceed (6-8 hours).

CeboMarmo, PIETRA RINASCIMENTALE application:

Apply CeboMarmo white with a stainless steel trowel in a diagonal direction. Proceed 2 square metre a time to avoid that the product gets dry before the sovrapposition of the other colors.

Working on the still wet product, apply the other CeboMarmo colors, one a time, following the beginning application direction.

Repeat the first phase all over the surface.

FIRST PHASE ENDING:

Wait the complete drying (at least 6-8 hours).

SECOND PHASE STARTING:

Remove from the surface all the imperfections and, if necessary, sand it by hand or machine with a 180 grain.

Apply CeboMarmo white with a stainless steel trowel all over the surface, following the application direction. Work the surface with enough pressure to compact and uniform the product.

POLISHING:

OPTION 1 – Hand polishing – :

Before of the complete drying, polish the surface passing repeatedly with the right pressure using the clean stainless still trowel.

OPTION 2 – Machine polishing – :

After at least 2-4 hours from the application of the last CeboMarmo hand, polish the surface using the machine with the following sequence of abrasive discs:

1st : 2000 grain

2nd : 4000 grain

IMPORTANT: After the polishing process, a thorough hand polishing with the stainless steel trowel is still required.

PROTECTION and FINAL POLISH:

CeboWax: beeswax-based interior finish, breathable and water repellent.

Apply one coat by sintetic sponge of CeboWax diluted 1:1 with water. Apply the wax following the application direction and then immediately, with a soft cloth, take away the material in excess from the surface.

After waiting 10-15 minutes, polish the surface with a stainless steel trowel using an adeguate pressure on the surface.