Preparation of the substrates

Verify that the substrates are uniform, perfectly clean and dry. In the presence of recent skimming, chalky or absorbent bases, carry out a thorough cleaning of the same and previously apply the insulating primer CeboFix M in one coat, by brush, diluted 1:1 with water. In the presence of mold it will be necessary to remove it using the wall detergent CeboMold.

Application of CeboPaint TS01

New or plasterboard walls: apply one coat of product by brush, diluted 40% with water, followed by two coats of product diluted 25–30%, applied by roller. Wait 4–6 hours between one coat and the other.

Already painted walls: apply two coats of product by roller, diluted 25–30% with water. Wait 4–6 hours between one coat and the other.

Application of CeboCharme

On the base prepared with CeboPaint TS01 white and perfectly dry, apply the first coat of CeboCharme, tinted in the desired color, using the polycarbonate trowel (A/20): spread the product with crisscross movements until uniformly covering the entire surface. Once drying of CeboCharme has occurred (minimum 4–6 hours), apply in the same way the second coat: it is advisable to proceed with the application in the opposite direction compared to the first coat, in order to avoid creating unaesthetic application joints.

Application of CeboVitra Matt

Transparent water-based polyurethane protective for interiors, matte. The treated surfaces result washable and scratch-resistant. Once drying of CeboCharme has occurred (minimum 4–6 hours), apply CeboVitra Matt, ready to use, in one or two coats by brush, working with crisscross brushstrokes.

_

Vapor permeability values

CeboCharme applied over a coat of CeboPaint TS01

V 148,0,0 g/(m² d)      sd 0,14 m

Classification of the degree of permeability to liquid water according to UNI EN 1062-1:2005

V0: Not declared

V1 High: V > 150 and sd < 0,14
V2 Media: V 150 and 0.14 sd
V > 15 and sd < 1.4
V3 Low: V 15 and 1.4 SD