Surface treatment:
Attention: check that the supports are uniform, perfectly clean and dry. In the presence of recent shavings, chalky or absorbent surfaces, clean the surface thoroughly and first apply the CeboFix M insulating fixative in one hand, with a brush, diluted 1:1 with water.
CeboSi Fondo: water-based acrylic primer, with a slightly embossed appearance. Apply the product with a short-haired roller, in one or two hands until the surface is completely covered.
FondoPlus: water-based acrylic primer, with high coverage and whiteness. Apply the product with a short-haired roller, in one or two hands until the surface is completely covered.
Please note: both CeboSi Fondo and FondoPlus are ideal primers for the subsequent application of CeboSi Decoro.
Application cycle
Spatolato effect: on the surface prepared with CeboSi Fondo or colored FondoPlus, apply an adequate quantity of CeboSi Decoro to smooth with a steel or plastic trowel, with the aim of obtaining total coverage of the substrate and a smooth surface. Once the first coat is completely dry (4-6 hours), apply the second coat of product with a trowel, using crossed spatula strokes.
Nuvolato effect: on CeboSi Fondo or colored FondoPlus apply an adequate quantity of CeboSi Decoro with a steel trowel to smooth, with the aim of obtaining total coverage of the substrate and a smooth surface. Once the first coat is completely dry (4-6 hours), apply the second coat of product with the trowel for approximately 2-3 m2 and, while the product is still wet, go over the surface using circular movements with the rectangular or polygonal polycarbonate trowel.